Panasonic S-80MW1E5 Service Manual & Test Run Service Manual page 42

4. Remote Controller Servicing Functions
Sensor Temperature Display Function (displayed regardless of whether unit is operating
or stopped)
The procedure below displays the sensor temperatures from the remote controller, indoor unit, and outdoor unit on
the remote controller.
<Procedure of CZ-RTC5>
Keep pressing the
1
buttons simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the
LCD display.
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4.Test run
Sel.
Press the
2
menu.
If you wish to see the next screen instantly, press
the or
Select "5. Sensor info." on the LCD display and
press the
Maintenance func
5. Sensor info.
6. Servicing check
7. Simple settings
8. Detailed settings
Sel.
Select the "Unit no." by pressing the
button for changes.
5
Sensor info.
Unit no.
1-1
Sel.
Then press the
Display sensor information of the unit.
Sensor info.
Unit no.
1-1
Scroll
Refer the information by pressing the
button.
, and
20:30 (THU)
Page [ ] Confirm
or button to see each
button.
button.
20:30 (THU)
Page [ ] Confirm
20:30 (THU)
Code no. Data
00 0026
01 0028
02 0026
Next
button.
20:30 (THU)
Code no. Data
00 0026
01 0028
02 0026
Sensor info.
Unit no.
1-1
Scroll
00 Room temp. controlled *
01 Remote controller temp.
02 Indoor unit intake temp. (TA)
Indoor unit heat exchanger
or
03
temp. E1 (E1)
Indoor unit heat exchanger
04
temp. E2 (E2)
Indoor unit heat exchanger
05
temp. E3 (E3)
06 Discharge air temp. (BL)
07 Discharge air temp. setting
08 Indoor unit MOV pulse (MOV)
Outdoor unit sensors
* Refer to the Service Manual of Outdoor
Unit.
or
5 - 12
Air-to-Water Indoor Unit
20:30 (THU)
Code no. Data
00 0026
01 0028
02 0026
Fig. 13
Indoor unit sensors
CZ-RTC5