Panasonic S-80MW1E5 Service Manual & Test Run Service Manual page 41

4. Remote Controller Servicing Functions
Test Run Function
Operates the unit with the thermostat forced ON.
<Procedure of CZ-RTC5>
Keep pressing the
1
buttons simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the
LCD display.
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4.Test run
Sel. Page [
2
Press the or
menu.
If you wish to see the next screen instantly, press
the or button.
Select "4. Test run" on the LCD display and press
the button.
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4.Test run
Sel. Page [
Change the display from OFF to ON by pressing
the or button. Then press the
button.
Test run
Test run
Change [
, and
20:30 (THU)
] Confirm
button to see each
20:30 (THU)
] Confirm
20:30 (THU)
ON
] Confirm
[ ]
START
3 Press the
on the LCD display.
TEST
[ ] START
4 Press the
Test run setting mode screen appears on the LCD
display.
TEST
MODE
COOL
5 - 11
Air-to-Water Indoor Unit
20:30 (THU)
CZ-RTC5
button. "TEST" will be displayed
20:30 (THU)
button. Test run will be started.
20:30 (THU)
5