5.5
Power menu
The Power menu items allow you to change the settings for the Advanced
Power Management (APM) and Advanced Configuration and Power Interface
(ACPI). Select an item then press <Enter> to display the configuration
options.
Suspend Mode
ACPI 2.0 Support
ACPI APIC Support
APM Configuration
Hardware Monitor
5.5.1
5.5.1
5.5.1
Suspend Mode [Auto]
Suspend Mode [Auto]
Suspend Mode [Auto]
5.5.1
5.5.1
Suspend Mode [Auto]
Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface
(ACPI) state to be used for system suspend.
Configuration options: [S1 (POS) Only] [S3 Only] [Auto]
5.5.2
5.5.2
ACPI 2.0 Support [No]
ACPI 2.0 Support [No]
5.5.2
5.5.2
5.5.2
ACPI 2.0 Support [No]
ACPI 2.0 Support [No]
ACPI 2.0 Support [No]
Allows you to add more tables for Advanced Configuration and Power
Interface (ACPI) 2.0 specifications. Configuration options: [No] [Yes]
5.5.3
5.5.3
5.5.3
ACPI APIC Support [Enabled]
ACPI APIC Support [Enabled]
ACPI APIC Support [Enabled]
5.5.3
5.5.3
ACPI APIC Support [Enabled]
ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power
Interface (ACPI) support in the Advanced Programmable Interrupt
Controller (APIC). When set to Enabled, the ACPI APIC table pointer is
included in the RSDT pointer list. Configuration options: [Disabled]
[Enabled]
A S U S V i n t a g e - P E 2
A S U S V i n t a g e - P E 2
A S U S V i n t a g e - P E 2
A S U S V i n t a g e - P E 2
A S U S V i n t a g e - P E 2
[Auto]
[No]
[Enabled]
Select the ACPI state
used for System
Suspend.
5 - 2 5
5 - 2 5
5 - 2 5
5 - 2 5
5 - 2 5