Removing The Side Plates And - Asus Vintage PE2 User Manual

2.3 Removing the side plates and front cover
The system has two chassis side plates, each one secured by two screws
located on the rear panel.
To remove the chassis side plate:
1. Locate two screws on the side
plate. Turn each screw
counterclockwise to release
the side cover. Set the screws
aside.
2. Slide the side panel for about
half an inch toward the rear
until it disengages from the
chassis.
3. Repeat steps 1 and 2 to
remove the other side plate.
4. Release the side lock tabs from
the side rail.
A S U S V i n t a g e - P E 2 A S U S V i n t a g e - P E 2 A S U S V i n t a g e - P E 2
A S U S V i n t a g e - P E 2 A S U S V i n t a g e - P E 2
S c r e w S c r e w S c r e w S c r e w S c r e w
S i d e l o c k t a b S i d e l o c k t a b S i d e l o c k t a b
S i d e l o c k t a b S i d e l o c k t a b
S i d e r a i l S i d e r a i l S i d e r a i l S i d e r a i l S i d e r a i l
2 - 3 2 - 3 2 - 3
2 - 3 2 - 3