Asus Vintage PE2 User Manual page 23

6. Close the load plate (A), then
push the load lever (B) until
it snaps into the retention
tab.
Notes on Intel Notes on Intel Notes on Intel
Notes on Intel Notes on Intel
• This motherboard supports Intel
package with Hyper-Threading Technology.
• Hyper-Threading Technology is supported under Windows
Linux 2.4.x (kernel) and later versions only. Under Linux, use the
Hyper-Threading compiler to compile the code. If you are using any
other operating systems, disable the Hyper-Threading Technology
item in the BIOS to ensure system stability and performance.
• Installing Windows
• Make sure to enable the Hyper-Threading Technology item in BIOS
before installing a supported operating system.
• For more information on Hyper-Threading Technology, visit
www.intel.com/info/hyperthreading.
To use the Hyper-Threading Technology on this motherboard:
1. Install an Intel
Technology.
2. Power up the system and enter the BIOS Setup (see Chapter 5: BIOS
setup). Under the Advanced Menu, make sure that the item
Hyper-Threading Technology is set to Enabled. The item appears only
if you installed a CPU that supports Hyper-Threading Technology.
3. Reboot the computer.
A S U S V i n t a g e - P E 2 A S U S V i n t a g e - P E 2 A S U S V i n t a g e - P E 2
A S U S V i n t a g e - P E 2 A S U S V i n t a g e - P E 2
® Hyper-Threading Technology Hyper-Threading Technology Hyper-Threading Technology
Hyper-Threading Technology Hyper-Threading Technology
® XP Service Pack 1 or later version is recommended.
® Pentium ® 4 CPU that supports Hyper-Threading
B
® Pentium ® 4 CPUs in the 775-land
A
® XP and
2 - 7 2 - 7 2 - 7
2 - 7 2 - 7