Asus Terminator P4 533 User Manual page 27

5. Connect a power cable from
the power supply to the power
connector at the back of the
CD-ROM. Use the cable with
the white connector labeled
P1.
6. Connect one end of the IDE
ribbon cable to the IDE
interface at the back of the
CD-ROM, matching the red
stripe on the cable with Pin 1
on the IDE interface.
7. Connect one end of the
CD-ROM audio cable to the
4-pin connector at the back of
the CD-ROM.
8. Connect the other end of the
IDE ribbon cable to the
secondary IDE connector
(black connector labeled IDE2)
on the motherboard.
9. Connect the other end of the
audio cable to the black 4-pin
connector labeled CD on the
motherboard.
CD-ROM Connector
(CD1)
ASUS Terminator P4 533 Barebone System
CD-ROM Audio Cable
IDE Ribbon Cable
Red Stripe to Pin 1
Secondary IDE connector
(IDE2)
Power Cable (P1)
27