Table of Contents
Advertisement
2.1
Remove the cover
The chassis cover is secured by a thumbscrew located on the rear panel.
Follow these steps to remove the
chassis cover.
1.
Turn the captive thumbscrew
counter-clockwise to release
the cover. You don't have to
remove the thumbscrew from
the chassis.
2.
Place your hands on both
corners of the front panel, just
beside the CD-ROM frame.
Push on the CD-ROM area
with your thumbs until the
cover tilts forward.
TIP
Another way to release the cover is
to place your hands underneath the
front panel edge, then push the
inner chassis with your thumbs
while pulling the panel with your
other fingers.
3.
While supporting the front
panel with one hand, place
your other hand on the top
rear edge of the cover and
carefully lift the cover from the
chassis.
16
Thumbscrew
Chapter 2: Basic Installation
Advertisement
Table of Contents
