Connect To The Ventilation; Evacuation Of The Moist Air Can Be Performed In Two Ways - Asko DC7573 Operating Instructions Manual

Connect to the ventilation

Evacuation of the moist air can be
performed in two ways:
• Waste air from the dryer cabinet is led to an
evacuation duct or an outlet in the wall using
the vent hose supplied. Recommended!
• Ventilation out into the room where the dryer
cabinet is positioned.
Ventilation out into the room where the
dryer cabinet is positioned
• Preferably open the door or window in the room
for the best ventilation.
• When the dryer cabinet is built-in, the supplied
ventilation hose (only some markets) is
replaced with a permanent ventilation pipe with
a diameter of 100 mm.
• The distance between the top edge of the
ventilation pipe and the ceiling must not be less
than 300 mm.
• The ventilation pipe must reach outside of the
in-built cabinet.
• Ensure a good air supply to the dryer cabinet's
air intake.
• The ventilation holes in the dryer cabinet must
not be blocked.
1. Moist air out
2. Air intake
2
1
Ventilation out into the room where the dryer
cabinet is positioned. Dryer cabinet freestanding
1
2
Ventilation out into the room where the dryer
cabinet is positioned. Dryer cabinet in-built in
tailored in-built cabinet.
Minimum 300
mm to the
ceiling
Minimum 300
mm to the
ceiling
9