Appendix C Dual Mode Network Specifications; Dual Mode Upgrades; Iec 62734 Network - Emerson 1410S Reference Manual

Reference Manual
00809-0600-4410
C Dual mode network specifications
C.1

Dual mode upgrades

The Emerson Wireless 1410S Gateway has the ability to connect two Emerson 781S Smart
Antennas. This upgrade can be added upon purchase of the Gateway, or it can be added
later through an order option file. This option file can be downloaded through the
Gateway web interface. There are no hardware variances between the standard Gateway
and a dual mode besides the addition of another Emerson 781S Smart Antenna. Dual
mode capabilities are not possible if the Gateway has integrated intrinsically safe barriers.
These barriers are intended for Emerson 781S Smart Antenna installation in Class 1 Div 1
or Zone 0 areas. If dual mode and this installation are required, purchasing separate
intrinsically safe barriers to use with the dual mode Gateway is recommended.
C.2

IEC 62734 Network

The Emerson 1410S Gateway supports communications to the Emerson 781SC Smart
Antenna that communicates through the IEC 62734 standard (ISA100 protocol). This
protocol is intended for legacy devices to be supported while a transition to WirelessHART
is made.
Figure C-1: Network Settings
This network is separate from the WirelessHART network. The network settings can be
changed on the System Settings → Network → Network Settings page below the
WirelessHART settings. A unique network name should be chosen for both the
WirelessHART and ISA100 networks. These settings are separate and need to be saved one
at a time in order for changes to take effect.
Emerson 1410S/781S
Dual mode network specifications
September 2020
®
61