Software Installation; Security Setup Utility - Emerson 1410S Reference Manual

Commissioning
September 2020
Table 4-3: Supported Operating Systems
Operating system
Windows 7
Windows 8
Windows Server 2008
Windows 10
Note
Only 32-bit versions of the operating systems are supported for AMS Wireless
Configurator.
4.3

Software installation

The software can be found on the two-disk pack, included with the Gateway. Depending
on the PC system configuration, installation may take 30-35 minutes. Installing disk one
followed by disk two is recommended. The Security Setup Utility is located on disk 1.
Procedure
1. Exit/close all Microsoft
2. Insert disk 1 into the CD/DVD drive of the PC.
3. Follow the prompts.
4. Exit/close all Windows programs, including any running in the background, such as
5. Insert disk 2 into the CD/DVD drive of the PC.
6. Select Install from the menu when the AMS Wireless Configurator setup begins.
7. Follow the prompts.
8. Allow AMS Wireless Configurator to reboot PC.
9. Do not remove the disk from the CD/DVD drive.
10. Installation will resume automatically after login.
11. Follow the prompts.
Note
If the autorun function is disabled on the PC, or installation does not begin automatically,
double click D:\SETUP.EXE (where D is the CD/DVD drive on the PC) and select OK.
4.4

Security setup utility

The Security Setup Utility enables secure communications between the Gateway and host
system, asset management software, data historians, or other applications. This is done by
encrypting the standard data protocols (AMS Wireless Configurator, Modbus
OPC) used by the Gateway and making them available through various proxies within the
34
®
background, such as virus scan software.
AMS Wireless Configurator is located on disk 2. To install the software:
virus scan software.
(continued)
Version
Enterprise, Service Pack 1
Enterprise, Service Pack 1
Standard, Service Pack 2
Enterprise, Service Pack 1
™
Windows programs, including any running in the
Reference Manual
00809-0600-4410
®
TCP, and
Emerson.com