Fault Indications - Asko D3720 Use And Care Manual

Fault indications

Display
Overfilling
Water inlet fault
Inlet valve leakage Inlet valve leakage
Drainage fault
Blocked filter
To remove the fault indications from the display, turn off the main switch and then turn it
back on again.
Type of fault
Too much water in the machine
Fault in the water inlet
Blocked drain
Clogged filter
Action
Phone for service
Check that the tap is open
Shut off the tap and phone for
service
See 'Possible causes' in chapter
Troubleshooting
Clean filters, see chapter
Cleaning
25