Installation; Suggestions On Positioning The Dishwasher; Built-In; Freestanding - Asko D3720 Use And Care Manual

Installation

Suggestions on positioning the
dishwasher
The dishwasher can be built in, fully free-
standing or semi-freestanding.
Installation av två diskmaskiner.
Se dubbelinstallation
CAUTION!
Connection to electricity, water and drain-
age must be carried out by a suitably
qualified person.
A. Built-in
The dishwasher can be built in under a
work surface with a working height of 860-
910 mm. The width measurement must be
at least 600 mm. For more measurements
see picture.
B. Freestanding
A freestanding dishwasher must be fitted
with anti-tilt. This comprises two fastening
irons which are screwed into place as il-
lustrated.
The dishwasher is then pushed in so that
the fastening irons grip onto the rear feet.
The dishwasher cannot now tilt in the
event a load is placed on the open door. If
the dishwasher is to be fully freestanding,
both side panels and the work top should
be fitted. These accessories can be pur-
chased where you purchased the
dishwasher.
C. Semi-freestanding
If the dishwasher is positioned so that ei-
ther side is visible, a side panel can be fit-
ted.
These accessories can be purchased
where you purchased the dishwasher.
D. Machines with wooden door
Stronger door springs are available for
purchase for machines with a fitted
wooden door. Springs are available for
various weights and sizes of wooden door.
30
Door springs can be purchased from the
retailer who sold you the dishwasher.
Built-in installation
860-910
Freestanding installation
CAUTION!
A fully freestanding dishwasher must be
fitted with anti-tilt.
Tip!
A machine with side panels and a counter
top (freestanding) can, of course, also be
installed as a built-in unit.
NB!
The air outlet must not be blocked.
860-
910
140-
150