Table of Contents
Advertisement
9.3. Wiring System Diagrams
(1) Refer to Section 9.2. "Recommended Wire
Length and Wire Diameter for Power Supply
System" for the explanation of "A", "B", "C"
and "D" in the above diagram. (Fig.9-1)
(2) The basic connection diagram of the indoor
unit shows the terminal boards, so the
terminal boards in your equipment may differ
from the diagram.(Fig.9-2)
(3) Refrigerant Circuit (R.C.) address should be
set before turning the power on.
(4) Regarding R.C. address setting, refer to the
installation instructions supplied with the
remote controller unit(optional). Auto address
setting can be executed by remote controller
automatically.
instructions
supplied
controller unit(optional).
Refer
to
the
installation
with
the
Fig.9-1
remote
14
Fig.9-2
Advertisement
Table of Contents
