AMX UPC20 Plus Operation/Reference Manual page 15

UPC20+ Control Mode Functions for Inputs 1 and 2 (Cont.)
Control
Mode
Power, 2
Button
Power,
Momentary
#1, Latch-
ing #2
Power,
Momentary
#1, Latch-
ing #2
UPC20+ Control Mode Functions for Inputs 3 and 4
Control Mode
Motor, Single But-
ton
Motor, 2/3 Button
Motor, Momentary
Power, Momentary On, On, On, On Minimum
Power, Latching
UPC20+ Universal Power Controller
S2 Switch R8 Motor
Setting Time Delay
Pot
On, Off, Off, On Minimum
Maximum
On, Off, On, On Minimum
Maximum
Minimum
Maximum
S2 Switch R8 Motor
Setting Time Delay
Pot
On, On, Off, On Minimum
Minimum
Off, Off, Off, On Minimum
Maximum
Off, On, Off, On Minimum
Maximum
Maximum
Off, On, On, On Minimum
Maximum
Input 1 Input 2
(P2, pin 5-to GND) (P2, pin-6 to GND)
Push 1 = load 1 "on" Push 2 = load 2 "on"
Release 1 = load 1 "still Release 2 = load 2 "still on"
on"
Push 1 = load 1 "on" Push 2 = load 2 "on"
Release 1 = load 1 "still Release 2 = load 2 "still on"
on"
Note: Both loads can be
On at the same time.
Push 1 = load 1 "on" Push 2 = load 2 = "on"
Release 1 = load 1 "off" Release 2 = load 2 "still on"
Push 2 again = load 2 "off"
Release 2 again = load 2
Push 1 = load 1 "on" Push 2 = load 2 = "on"
Release 1 = load 1 "off" Release 2 = load 2 "still on"
Push 2 again = load 2 "off"
Note: Delay time does not Release 2 again = load 2
effect loads.
Push 1 = load 1 "on" Push 2 = load 2 "on"
Release 1 = load 1 "still Release 2 = load 2 "off"
on"
Push 1 again = load 1 "off"
Release 1 again = load 1
"still off"
Push 1 = load 1 "on" Push 2 = load 2 "on"
Release 1 = load 1 "still Release 2 = load 2 "off"
on"
Push 1 again = load 1 "off"
Release 1 again = load 1
"still off"
Note: Delay time does not
affect loads.
Input 1 Input 2
(P2, pin 5-to GND) (P2, pin-6 to GND)
Not used Not used
Not used Not used
Not used Not used
Not used Not used
Not used Not used
Not used Not used
Not used Not used
Not used Not used
Not used Not used
Not used Not used
Installation
"still off"
"still off"
9