AMX UPC20 Plus Operation/Reference Manual page 14

Installation
UPC20+ Control Mode Functions for Inputs 1 and 2
Control
Mode
Motor, Sin-
gle Button
Motor, 2/3
Button
Motor,
Momentary
Power,
Momentary
Power,
Latching
8
S2 Switch R8 Motor
Setting Time Delay
Pot
On, On, Off, On Minimum
Minimum
Off, Off, Off, On Minimum
Maximum
Off, On, Off, On Minimum
Maximum
On, On, On, On Minimum
Maximum
Off, On, On, On Minimum
Maximum
Input 1 Input 2
(P2, pin 5-to GND) (P2, pin-6 to GND)
Push 1 = load 1 "on" Not used
Release 1 = load 1 "off"
Push 1 again = load 2 "off"
Push 1 = load 1 "on" Not used
Release 1 = load 1 "off
after delay time out"
Push 1 again = load 2 "on"
Release 1 again = load 2
"off after time out"
Note: pushing again
restarts cycle.
Push 1 = load 1 "on" Push 2 = load 2 "on"
Release 1 = load 1 "off" Release 2 = load 2 "off"
Push 1 = load 1 "on" Push 2 = load 2 "on"
Release 2 = load 2 "off
Release 1 = load 1 "off
after time out"
Note: both loads cannot
be On at the same time.
Push 1 = load 1 "on" Push 2 = load 2 "on"
Release 1 = load 1 "off" Release 2 = load 2 "off"
Push 1 = load 1 "on" Push 2 = load 2 "on"
Release 2 = load 2 "off"
Release 1 = load 1 "off"
Note: No delay on
release.
Push 1 = load 1 "on" Push 2 = load 2 "on"
Release 2 = load 2 "off"
Release 1 = load 1 "off"
Push 1 = load 1 "on" Push 2 = load 2 "on"
Release 2 = load 2 "off"
Release 1 = load 1 "off"
Push 1 = load 1 "on" Push 2 = load 2 "on"
Release 1 = load 1 "still Release 2 = load 2 "still on"
on"
Push 2 again = load "off"
Push 1 again = load "off"
Release 2 again = load
Release 1 again = load
"still off"
Push 1 = load 1 "on" Push 2 = load 2 "on"
Release 1 = load 1 "still Release 2 = load 2 "still on"
on"
Push 2 again = load "off"
Push 1 again = load "off"
Release 2 again = load
Release 1 again = load
"still off"
Note: Both loads can be
On at the same time (time
delay does not affect).
UPC20+ Universal Power Controller
after time out"
"still off"
"still off"