English
If strainer is dirty:
Insert a suitable tool (e.g.
N
screwdriver) in the two recesses
(arrows) to loosen the strainer (1)
Pull the strainer (1) upward and out
N
of the solution container
2
Clean the strainer (2) with clear
N
water and a brush
After Dusting and Spreading – SR 450
only
Run the unit until the solution
N
container is completely empty
Close the dosage lever
N
Shut off the engine – see "Starting /
N
Stopping the Engine"
Rinse and clean the solution
N
container with clear water
26
Dispose of any residual rinsing
N
solution in accordance with
environmental requirements –
follow instructions of the chemicals
manufacturer
Allow the machine to dry with the
N
cap removed
Storing the Machine
Store the machine in a dry, high or
N
locked location sheltered from frost
– out of the reach of children and
other unauthorized persons.
For periods of 3 months or longer
Drain and clean the fuel tank in a
N
well ventilated area.
Dispose of fuel properly in
N
accordance with local
environmental requirements.
Run the engine until the carburetor
N
is dry – this helps prevent the
carburetor diaphragms sticking
together.
Thoroughly clean the machine – pay
N
special attention to the cylinder fins
and air filter.
Do not expose the container to
N
direct sunlight for unnecessarily
long periods. UV rays can make the
container material brittle, which
could result in leaks or breakage.
SR 430, SR 450