Filling The Container - Stihl SR 430 Instruction Manual

3
6
6
2 2
Press the levers (3) down until the
N
tabs (2) snap into their seats (6) on
the housing with a loud click.
Check that the container is firmly
N
seated.
Blower tube
1
Insert a screwdriver into the tab (1)
N
of the hose clamp (2) on the control
handle.
Turn the screwdriver clockwise to
N
loosen the hose clamp (2).
Pull the hose (3) off the stub.
N
SR 430, SR 450
3
6
Rotate the nozzle (4) until the
N
lugs (5) are covered.
Pull the nozzle (4) off the blower
N
tube (6).
Converting back to misblowing mode
The conversion is carried out in the
reverse sequence.
Fitting the hose
2
Push the hose with clamp (2) over
N
the stub on the control handle.
3
Use pliers to squeeze the hose
N
clamp together (2) until the retaining
strip engages and locks.
4
6
5
N
N
Mistblowing
2
N

Filling the Container

1
The gasket (1) in the cap must be in
good condition, lubricated with
grease and clean.
Stand the machine on a level
surface.
Close valve lever (1) for solution
feed.
English
1
23