Stihl SR 430 Instruction Manual page 24

English
Solution container
A
B
The selected operating mode is
indicated by the symbols on the
metering unit's housing.
Position A – Mistblowing mode
N
Position B – Dusting and spreading
N
mode
Insert a suitable tool (e.g.
N
screwdriver) in the two recesses
(arrows) to loosen the strainer (1).
Pull the strainer (1) upward and out
N
of the solution container.
22
2 2
Squeeze the tabs (2) together and
N
pull the lever (3) outwards.
4
Remove the solution container from
N
the metering unit's housing (4) and
turn it to position B (dusting and
spreading mode).
4
Thoroughly clean the plastic pins
N
and the sealing face on the solution
container – check that there is no
residue.
Thoroughly clean the holes and
N
sealing face on the metering unit (4)
– check that there is no residue.
Fit the solution tank on the metering
N
unit's housing (4).
5
Hook the lever (3) over the bar (5)
N
on the solution container.
SR 430, SR 450