Standard Short Exhaust Tailpipe; Optional Exhaust Extension - Trane Thermo King TriPac EVOLUTION Installation Manual

Exhaust Pipe Installation
I I m m p p o o r r t t a a n n t t : : See "APU Exhaust Tailpipe Installation Standards" in Section 5 of the Thermo King TriPac Installation
Standards Guide (TK 56498). THESE STANDARDS MUST BE FOLLOWED!
I I m m p p o o r r t t a a n n t t : : When the APU is installed under a sleeper, behind fairings, skirting, etc., the exhaust outlet must be routed
to an open area to prevent exhaust fumes from entering the passenger compartment which could result in
carbon monoxide poisoning or death by asphyxiation. Optional exhaust pipe extensions are available for
this purpose. Contact your nearest Thermo King Dealer.

Standard Short Exhaust Tailpipe

A short exhaust tailpipe is provided standard with each APU.
1. Install the short exhaust tailpipe (outlet facing down) onto the end of the muffler and secure with clamp.

Optional Exhaust Extension

The optional exhaust extension is used along with the standard short tailpipe.
1. Install the mounting bracket onto the side of the APU.
2. Install the extension pipe and clamp onto the end of the muffler.
3. Install the short exhaust tailpipe (supplied with APU) and clamp.
4. Face the tailpipe outlet down or towards the rear of the tractor.
5. Tighten all clamps securely.
Figure 13. Standard Short Exhaust Tailpipe and Optional Exhaust Extension Shown
28
TK 55676-19-IM-EN