Installation and operating manual
2. Product information
2.1. Scope of delivery
The table below indicates the scope of delivery for the DRYPOINT
Type
DEC 1 ... DEC 6
DEC 7 ... DEC 9
2.2. Type plate
The drying system is equipped with two type plates: One type plate for the entire system and one type plate for the control
unit.
2.2.1. Type plate for the drying system
Model:
Material No.:
Serial No.:
Batch:
Element:
Element mat.-no.:
Work. temp. TS:
Work. pr. PS:
Connection:
Power supply:
Protection-Class:
PED2014/68/EU/Category
8
Inlet side
Ball valve
G 1/2
-
DRYPOINT
Type:
Material-no.:
Serial-no.:
Lot:
Element:
Element mat.-no.:
Work. temp. TS:
Work. pr. PS:
Connection:
Power supply:
Protection-Class:
PED2014/68/EU/Category - Fluid group 2
Made in Germany
BEKO TECHNOLOGIES
www.beko-technologies.com
Designation
Model designation
Material number
Serial number
Date of manufacture
Designation for integrated filter element
Material number for integrated filter element
Min./Max. permissible operating temperature
Min./max. permissible working pressure
Pipework connection
Data for voltage supply
IP 54
Permissible fluid group according to European Pressure
Equipment Directive
M eco control.
®
Wall bracket
M eco control
®
DEC6-135S
4039476
13434090
201621
06N-V02
4010849
+2 ... 50 °C / +35 ... 122 °F
4 ... 10 bar / 58 ... 145 psi
pipe G 1/2
95 ... 240 VAC ± 10 %
50-60 Hz, max. 20 VA(W)
100 ... 125 VDC ± 10 %
IP 54
Description
Outlet side
Long nipple/
double nipple
G 1/2
G 1
DRYPOINT
EN
Check valve
G 1/2
G 1
M eco control
®