Table of Contents
Advertisement
Installation and operating manual
9. Remedying malfunctions, errors, faults and troubleshooting
9.1. Behaviour in the event of malfunctions/errors, faults
Errors and faults in the functions or damages should be compared with the possible following listed cause of errors in the
FAQ section. If necessary, contact the manufacturer for advice.
9.1.1. Failure of the voltage supply
In the event of a voltage supply failure, the solenoid valve opens so that the purge air flow is unrestricted.
As soon as the voltage supply has been restored, the DRYPOINT
previously applicable settings.
9.1.2. Sensor failure
The sensor detects the failure or the fault by the sensor: red LED is lit permanently
•
Power LED: continuously shows the operating mode
•
Value LEDs: continuously show the set value
52
M eco control returns to normal mode with the
®
DRYPOINT
M eco control
®
EN
Advertisement
Table of Contents
