Installation; Savewater Product Features And The Right Location For Installation - Beko TR550 User Manual

4 Installation

Read the "Safety Instructions" first!
Before consulting the nearest Authorized
Service for installing the drying machine, see
the information in the user guide and make sure
the electric and water utilities are as required. If
not, call an electrician and plumber to arrange
the utilities as necessary.
It is customer's responsibility to
prepare the location the drying
machine shall be placed on and
also have power and waste water
installation prepared.
Check for any damage on the
drying machine before installing it. If
drying machine is damaged, do not
get it installed. Damaged products
cause a risk for your safety.
Wait 12 hours prior to operating the
drying machine.
The product includes a cooling
agent and if the product is operated
right after its transported, it may
NOTICE
get damaged. After each time the
product is moved, it shall be left to
rest for 12 hours.
4.1 SaveWater product features and
the right location for installation
• The SaveWater feature can only be
used after installation with SaveWater
compatible Washing Machines.
• SaveWater products have a fixed water
tank and cannot be removed from the
tank.
• SaveWater products are machines that
save up to 10% of water by using the
water accumulated by the dryer in the
washing machine.
• SaveWater products are machines that
allow you to see the water accumulated in
your tank with the help of the window on
the windshield.
• If you want to use the SaveWater
feature, pay attention to the following;
Dryer / User Manual
• The dryer must be installed on the
Washing Machine with the help of the
Stacking Kit, and the Dryer Tank and
Washing Machine valve connections must
be made.
• First, stack your new dryer over your
washing machine using the Stacking
Kit. Next, open the front feet by 5 mm
to balance the machine. Finally, ensure
that everything is secure, and finish the
installation.
• If you do not want to use the Savewater
feature, pay attention to the following;
• The Dryer must be installed on a stable,
flat surface and used with the Direct drain
feature (Pages 16 – 4.3).
• Dryer machine is heavy. Do not move it by
yourself.
• Operate the drying machine in an
environment free of dust with good
ventilation.
• The gap between the drying machine and
the floor shall not be reduced via materials
such as rugs, pieces of wood and bands.
• Do not block the ventilation grilles of the
drying machine.
• There shall not be doors that can be
locked, sliding doors or hinged doors near
the installation environment of the drying
machine that may block the loading door
to be opened.
• Once the drying machine is installed,
the connections must stay stable. After
placing the drying machine, ensure that
the back wall does not come in contact
with any extrusion (a water tap, electrical
outlet etc.).
• Place the drying machine with at least 1
cm space between the product and the
furniture edges.
47