Table of Contents
Advertisement
EN
4. Electrical installation
4.1. Warning notices
Mains voltage
DANGER!
Risk of electric shock with serious or even fatal injuries if contact is made with non-insulated, live
components.
•
•
•
•
•
•
Skilled technical personnel
1
Skilled technical personnel are people who, due to their professional qualification and knowledge in the field of measuring,
control and pneumatic technology, and their knowledge of the applicable statutory regulations, guidelines and standards
are in a position to independently foresee potential dangers in relation to the use of the device and who are qualified to
perform the tasks described in this manual. Special operating conditions e.g. aggressive media require additional knowledge.
The control unit of the DRYPOINT
connection plug. It is therefore not necessary to open the control unit to connect it to the power supply.
4.2. Power supply and cable routing
NOTE
X
DRYPOINT
M eco control
®
Observe all applicable regulations with respect to electrical installations (e.g. VDE 0100 / IEC
60364).
Electrical works may only be executed by authorised skilled technical personnel
Read off the permissible operating voltage on the type plate and always comply with it.
Only utilise components for the electrical installation which have current authorisation
and are labelled with a CE-Identification Marking.
A safely accessible circuit breaker (e.g. power plug or switch) must be provided close to the unit
for disconnecting all current and/or power lines for the voltage supply.
Never execute any connection works when the system is energised.
M eco control drying system is factory equipped with a power cable and device
®
Power supply and electromagnetic interference!
Inappropriate connection and long cable routes promote electromagnetic interference and can
impair function.
•
Do not remove split ferrite from the mains cable.
•
Do not connect any other devices via the internal voltage supply of the DRYPOINT
control .
•
Keep the mains cable between the socket and the DRYPOINT
possible, wind if appropriate.
Installation and operating manual
.
1
M eco control as short as
®
M eco
®
23
Advertisement
Table of Contents
