Using The Library - Tascam 12 Owner's Manual

5 - Basic recording
4.
Turn the MULTI JOG, and adjust the set effect.
You can check the effect as you change it.
NOTE
i Turn the MULTI JOG dial to change the F4 button function
. Press the F4
from to
the state before turning the MULTI JOG dial.
i Press the F4
button to set a parameter value to its
default.
i " " appears for effects that include delay. When the TIME
parameter item is selected, the CLICK button can be pressed
repeatedly at the desired speed to set the tempo.
i When the footswitch setting is "TAP", the footswitch can be
used instead of the CLICK button for TAP delay input. (see
"Setting up the footswitch" on page 56)
Press the F2
5.
button to turn the built-in effect on/off.
The A item on the EFFECT screen shows the built-in effect
status.
Status Meaning
ON (default) The built-in effect is on.
OFF The built-in effect is off.
The built-in effect cannot be used
N/A
(because the AUX 2 jack is in use).
NOTE
When the built-in effect is off, the icon appears on the
Home Screen.
6. Press the F1
button to return to the Home Screen.
42
TASCAM Model 12

Using the library

This unit has a library function that allows up to 10 built-in effect
settings to be saved.
Saving effects settings in the library
1.
2.
button to return to
3.
4.
Using an effect setting saved in the library
1.
2.
3.
Press the SELECT button to open the EFFECT Screen.
Press the MULTI JOG dial to select the LIB item.
Turn the MULTI JOG dial to select the library number to
save.
Follow the procedures in "Setting the built-in effect" to set
the built-in effect.
This saves the effect setting in the library.
Press the SELECT button to open the EFFECT Screen.
Press the MULTI JOG dial to select the LIB item.
Turn the MULTI JOG dial to select the library number with
the saved effect setting you want to use.
This applies the saved effect setting.