Monitoring Section - Tascam 12 Owner's Manual

; m/, buttons
i When stopped and during playback, press and hold these
buttons to search backward/forward.
i When the Home Screen is open, press the m button
to locate to the beginning of the current song (00:00:00,
which is the zero point).
i When the Home Screen is open, press the , button to
locate to the end of the current song.
i If the current song has auto punch in or out points set, you
can also locate to those points.
i If the current song has marks set, these can also be used to
locate to them.
i While pressing the 8 button, press the m button to
locate to the point where recording last started.
i While pressing the 8 button, press the , button to
locate to the point where recording last stopped.
i When the SD PLAY Screen is in playback state, press to skip
a file. (see "Playing WAV files on SD cards (SD PLAY mode)"
on page 62)
z MENU button
i When the Meter Screen is open, press to open the Home
Screen.
i When the MENU Screen or a menu item settings screen is
open, press to return to the Home Screen.
i When the Home Screen is open, press to open the MENU
Screen. (see "Menu structure" on page 28) and (see "Basic
MENU screen operations" on page 29)
x 8 button/indicator
Press to stop playback or recording.
This button lights when stopped.
Press this button when paused to return to the beginning of
the song or file.
c 7/9 button/indicator
Press this button to start playback.
This button lights during playback and recording.
This button blinks when paused.
v 0 button/indicator
Press this button to start recording.
This button lights during recording.
Press this button during playback to start recording (Manual
punch in).
2 - Names and Functions of Parts

Monitoring section

b MUTE switch/indicator (AUX 1/AUX 2)
When MUTE switches are on (MUTE indicators lit), signals to
the AUX OUTPUT AUX 1/2 jacks are muted.
n AFL switches (AUX 1/AUX 2)
When these switches are on (pushed in), the AUX OUTPUT
AUX 1/2 jack output signals are sent to the SOLO L/R bus.
When these switches are on, the sound of the SOLO L/R bus
can be heard through headphones.
m PAIRING button and indicator
Press and hold this button to activate Bluetooth pairing
mode.
Press when pairing to end pairing mode. (see "Connecting
with Bluetooth devices" on page 32)
, ASSIGN switch
Sound from the Bluetooth device is sent to channels 9/10
when this switch is set to "9/10" or the MAIN MIX L/R bus
when it is set to "MAIN".
. AUX 1/AUX 2 knobs
Use to adjust the output levels of the AUX OUTPUT AUX 1/2
jacks.
/ PFL/AFL MASTER knob
Use this to adjust the send level from the SOLO L/R bus.
! SD MAIN MIX RETURN switch
When this switch is on (pushed in), playback of stereo master
files recorded on the SD card is output from the MAIN
OUTPUT jacks.
ATTENTION
Be aware that when this switch is on (pushed in), the sound
of the MAIN MIX L/R bus is not output.
@ PHONES knob (1/2)
Use this to adjust the headphone output level.
V CAUTION
Before connecting headphones, minimize the volume with
the PHONES knob. Failure to do so could result in a sudden
loud noise that could harm hearing, for example.
# AUX 1/2 /MAIN switch
Turn these switches on to monitor signals from the AUX 1
and AUX 2/FX buses.
23
TASCAM Model 12