Routine Maintenance - Johnson Controls S300 Series Hardware Installation Manual

Hardware Installation
Item
Red LED/Green LED/
OUT1/OUT2 Outputs
Communications
Certifications
Mounting Specifications
Dimensions
Weight
Ambient Temperature
Humidity
Ventilation
* The RDR8S does not support 1-wire Wiegand readers.
M
AINTENANCE
This section provides maintenance instructions, operational testing procedures, and
information on replacement parts.
LEDs
The RDR8S and I32O16 modules have 4 LEDs:
Power (POWER): On during normal operation.

Status (STATUS): Blinks every second when unit is operational.

Transmit (XMIT): Blinks when a character is transmitted on theS300 bus.

Receive (RCV): Blinks when a character is received from the S300 bus.


Routine Maintenance

For the RDR8S or I32O16 maintenance, perform the operational testing monthly
(see "Testing Procedure" on page 23).
22
Specification
100mA max. 0-24VDC.
These open collector outputs can be damaged with
!
the use of alternating current (AC) potentials as low
as 1VAC. The LED outputs can only be connected to
CAUTION
direct current (DC) loads up to 24VDC.
2 or 3-wire RS-485
FCC, Class B
CE Mark
C-Tick
ICES-003, Class B
DIN rail
Flat surface
5.15 H x 10.58 W x 2.5 D inches (13.07 cm x 26.88 cm x 6.36 cm)
2.75 lb (1.2 kg)
32º to 122ºF (0º to 50ºC)
10 to 85% non-condensing
Cabinets require free movement of air over all exposed surfaces
This document contains confidential and proprietary information of Johnson Controls, Inc.
RDR8S and I32O16 Modules
24-10489-0 Rev. B
© 2010 Johnson Controls, Inc.