Table of Contents
Advertisement
Step 9 Connect Cables,
J32 Reset Switch Connector
J32 is a two-pin single-inline berg that is attached via a cable to an externally-mounted reset switch. When
the reset switch is pressed, the system performs a hard reset. Pin 1 is ground and Pin 2 is Hard Reset.
J27 Speaker Connector
J27 is a four-pin single-inline berg that is attached via a cable to the system speaker. AMIBIOS signals
hardware problems through the speaker. Pin 1 on the motherboard is identified by the arrow on the white
box around the berg.
Chapter 2 Installation
66
Continued
Pin
Description
1
Data Out
2
Key
3
N/C
4
VCC
Advertisement
Table of Contents
