Table of Contents
Advertisement
Reprogramming from System Boot, Continued
Sequence of Operation
The following table lists the sequence of operation and the expected
behavior of the AMIFlash Code.
1 Look for
floppy disk.
2 Look for
S707P.ROM on
the floppy
disk.
3 Read the
floppy disk.
4 Check for
BIOS file
size.
5 Check for
Flash EPROM.
6 Erase the
Flash EPROM.
7 Program the
Flash EPROM.
8 Continue
programming
the Flash
EPROM.
9 AMIFlash
does a reset.
10 Reboot
Super Voyager VLB-III ISA Motherboard User's Guide
Step
The system beeps one time
before the BIOS attempts to
read from floppy drive A:.
S707P.ROM must be in the root
directory of the floppy disk
in drive A:. There is no beep
if successful.
The floppy disk is read. There
is no beep if this step is
successful.
The BIOS file size is checked.
There is no beep if this step
is successful.
The BIOS looks for an Intel
i28F001BX-T Flash EPROM. It
does not beep if this step is
successful.
Two beeps sound when the BIOS
begins erasing the Flash
EPROM.
Three beeps sound when the
AMIFlash Code begins
reprogramming the Flash EPROM.
Four beeps sound when
reprogramming has been
successfully completed.
A CPU reset is generated (the
system reboots).
Reboot the system.
Expected behavior
109
Advertisement
Table of Contents
