Table of Contents
Advertisement
Step 9 Connect Cables,
Continued
J47 Green PC Monitor Connector
Attach a 10-wire 10 to 26-pin flat cable between J47 on the motherboard and the VGA Feature Connector
on the VGA adapter card or Graphics Accelerator. J47 is shown below.
The VGA cable is pictured below.
After the timeout period specified in Power Management Setup expires, the motherboard drives the SYNC
ENABLE, HSYNC, and VSYNC signals Low through open collector outputs. Monitors that support the
Display Power Management Specification (DPMS) can turn power off after examining this condition,
saving power.
Super Voyager VLB-III ISA Motherboard User's Guide
65
Advertisement
Table of Contents
