American Megatrends Enterprise-II User Manual page 57

Error Message
replace the hard disk.
Diskette Boot Failure The boot diskette in floppy drive A: is corrupt. It cannot be
used to boot the system. Use another boot diskette and follow
the screen instructions.
Display Switch Not Some systems require a video switch on the motherboard be
Proper set to either color or monochrome. Turn the system off, set
the switch properly, then power on.
DMA Error Error in the DMA controller on the motherboard.
DMA #1 Error Error in the first DMA channel on the motherboard.
DMA #2 Error Error in the second DMA channel on the motherboard.
FDD Controller Failure The BIOS cannot communicate with the floppy disk drive
controller. Check all appropriate connections after the system
is powered down.
HDD Controller Failure The BIOS cannot communicate with the hard disk drive
controller. Check all appropriate connections after the system
is powered down.
INTR #1 Error Interrupt channel 1 failed POST.
INTR #2 Error Interrupt channel 2 failed POST.
Invalid Boot Diskette The BIOS can read the diskette in drive A: but it cannot boot
the system with it. Use another boot diskette and follow the
screen instructions.
Keyboard Is The keyboard lock on the system is engaged. The system
Locked...Unlock It must be unlocked to continue the boot process.
Keyboard Error Timing problem with the keyboard. Make sure a keyboard
controller AMIBIOS is installed. Set the Keyboard option in
STANDARD CMOS SETUP to Not Installed to skip the
keyboard POST routines.
KB/Interface Error Error in the keyboard connector on the motherboard.
No ROM BASIC Cannot find a proper bootable sector on either diskette drive
A: or hard disk drive C:. Use a bootable disk.
Off Board Parity Error Parity error in offboard memory. The format is:
OFF BOARD PARITY ERROR ADDR (HEX) = (XXXX)
XXXX is the hex address where the error occurred. Run
AMIDiag to find and correct memory problems.
Onboard Parity Error Parity error in motherboard memory. The format is:
Onboard PARITY ERROR ADDR (HEX) = (XXXX)
XXXX is the hex address where the error occurred. Run
AMIDiag to find and correct memory problems.
Parity Error ???? Parity error in system memory at an unknown address. Run
AMIDiag to find and correct memory problems.
American Megatrends Enterprise-II Motherboard User's Guide
Explanation
49