ADVANCED CMOS SETUP Options,
Continued
Hard Disk Type 47 RAM Area
You can specify a user-definable hard disk
type for drive C: and drive D:. The type
47 drive parameters must be entered in
STANDARD CMOS SETUP (see page 66). This
option specifies the type 47 data storage
area – 0:300h in lower system RAM or in
the top 1 KB of applications memory,
starting at address 639K or 511K
(depending on how much base memory the
system has). Type 47 data is stored in
shadow RAM if shadowing is enabled. The
following graphic illustrates type 47 data
storage.
Chapter 4 - BIOS Setup
72