Step 9 Install Floppy Drive
P8 Floppy Disk Drive Connector
P8 is a 34-pin dual-inline berg. Connect the cable from the floppy drive(s) to P8. The onboard floppy
controller cannot be used if an adapter card with floppy controller is installed.
P12 Floppy Disk Connect and Cable
The motherboard supports up to two 720 KB, 1.44 MB, 2.88 MB 3½" drives and/or 360 KB and 1.2 MB 5¼"
floppy drives. The 34-pin ribbon attaches to P8 and the drives. The cable has a small twist between the floppy
connectors. The end connector is connected to floppy drive A:.
Atlas PCI Pentium EISA Motherboard User's Guide
45