Table of Contents
Advertisement
TECHNICAL SPECIFICATIONS
Supply voltage:
Power consumption:
Mounting height:
Temperature range:
Degree of protection:
Applicable directives:
Detection mode:
Technology:
Output:
Test input *:
Specifications are subject to changes without prior notice.
All values measured in specific conditions.
* SEE APPLICATION NOTES OR CONTACT BEA FOR TECHNICAL SUPPORT
FCC
BEA Inc.
G9B
This device can be expected to comply with Part 15 of the FCC Rules provided it is assembled in exact accordance with the
instructions provided with this kit. Operation is subject to the following conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received including interference that may cause undesired
operation.
ANSI / AAADM
CONTACT
Page 8 of 8
12 V - 24 V AC, 50/60 Hz; 12 V - 30 V DC (15 W Class II)
< 2.5 W
6.5 ft to 11.5 ft
(local regulations may have an impact on the acceptable mounting height)
Sensor: -31°F to +131°F
LCD: 14°F to +131°F
0-95% relative humidity, non condensing
IP54
R&TTE 1999/5/EC; EMC 2004/108/EC; MD 2006/42/EC; RoHS 2002/95/EC
Presence
Typical response time: < 200 ms (max. 500 ms)
Active infrared with background analysis
Spot: 5 cm x 5 cm (typ)
Number of spots: max. 24 per curtain
Number of curtains: 2
Solid-state-relay
(potential and polarity free)
Max. contact current: 400 mA
Max. contact voltage: 42 V AC/DC
Automatic Holdtime: 0.3 or 1 s
Sensitivity: Low: < 1 V; High: > 10 V (max. 30 V)
Response time on test request: typical: < 5 ms
75.5785.01 IXIO-ST UL INDUSTRIAL 20140402
Advertisement
Table of Contents
