* Output status when sensor is operational Mounting and wiring are compatible with the Wizard. ** SEE APPLICATION NOTES OR CONTACT BEA FOR TECHNICAL SUPPORT Sensor connectivity (power and relays) must utilize only the supplied harness. Sensor power must be supplied from a Class 2 supply source limited to 15 W.
Page 3
STEP OUT OF THE INFRARED FIELD! SETUP 1 (QUICK) reference picture SETUP 2 (ASSISTED) test of full door cycle + reference picture IMPORTANT! Walk test the proper operation of the installation before leaving the premises. 75.5785.01 IXIO-ST UL INDUSTRIAL 20140402 Page 3 of 8...
VALUE CHECK WITH REMOTE CONTROL Pressing a parameter symbol on your remote control, displays the saved value directly on the LCD-screen. Do not unlock first. * SEE APPLICATION NOTES OR CONTACT BEA FOR TECHNICAL SUPPORT Page 4 of 8 75.5785.01 IXIO-ST UL INDUSTRIAL 20140402...
ADMIN enter code to access admin mode AIR: C1 ENERG signal amplitude received on curtain 1 BACK * SEE APPLICATION NOTES OR CONTACT BEA FOR TECHNICAL SUPPORT 75.5785.01 IXIO-ST UL INDUSTRIAL 20140402 Page 5 of 8...
Enter the correct password. To access the control does not a password sensor without a password, cycle power. react. Sensor may be accessed for 1 minute. Download the BEA DECODER app for a quick overview of settings Page 6 of 8 75.5785.01 IXIO-ST UL INDUSTRIAL 20140402...
The Sensor should be properly installed and adjusted and the proper functioning of the Sensor, when installed with an end product, as intended in UL 325 standard, shall be verified by the installer. 75.5785.01 IXIO-ST UL INDUSTRIAL 20140402 Page 7 of 8...
Specifications are subject to changes without prior notice. All values measured in specific conditions. * SEE APPLICATION NOTES OR CONTACT BEA FOR TECHNICAL SUPPORT BEA Inc. This device can be expected to comply with Part 15 of the FCC Rules provided it is assembled in exact accordance with the instructions provided with this kit.