Installation and Service Guide
Installing and Servicing
1
the SpeedDome Ultra
Camera Dome
RAS515 and RAS516 Series with
On-Screen Menu Programming
Figure 1. SpeedDome Ultra III camera dome
Mounting
Base
Housing
Eyeball
SpeedDome, Sensormatic, and the Sensormatic logo are
registered trademarks of Sensormatic Electronics Corporation.
Other product names (if any) mentioned herein may be
trademarks or registered trademarks of other companies.
No part of this guide may be reproduced in any form without
written permission from Sensormatic Electronics Corporation.
© Copyright 1998. All rights reserved.
MDR 7/98
8000-2573-01, Rev. B (34 pages)
Contents
III
®
Ordering Parts ..................................................... 28
Declarations ........................................................ 33
About this Guide
This guide explains how to:
Install the camera dome
Service the camera dome.
This guide does not explain how to:
Determine the best location for the camera
dome. Because the best location is determined
by customer requirements, you will be supplied
this information separately.
Attach the mounting base. See information
shipped with the base.
Assemble indoor housings used with this dome.
See information shipped with the housing.
Install and service the dome outdoors. See
information shipped with the outdoor housing.
Assemble mounting structures used with this
dome. See information shipped with the
structure.
Program the dome. See operator's guide
shipped with the dome.
SpeedDome Ultra III Camera Dome
1