Table of Contents
Advertisement
AD5500
First, select the Excalibur operators to be reported. The
Operator list box shows all operators defined for the system.
Select either the "All Operators" check box, or one or more
individual operators from the list box. If the Operator
Login/Logout Alarm Events are not to be selected for the
report, it is not necessary to define any operator.
Next, select the alarm/control points to be reported. The
Alarm/Control Point list box identifies all defined alarm icon
points (camera, map, and other icon actions are not logged).
Select the "All Points" check box to report on all points, or
select one or more specific points from the list box. If System
start/exit and Operator login/logout Alarm Events are selected,
it is not necessary to define any alarm/control point.
Next, select the date and time period (From, To) for the search.
The default start date is January 1, 1993 and the default end
date is the current date. The time must be entered in 24 hour
(military style) format. Enter any start and end date desired.
The start date must be before (or the same as) the end date or
no records will be found. If dates are defined that are not valid
for the log file selected, no records will be found. The starting
date for a log file can be determined from the file name. For
example, log file "01011994.EXL" was started on January 1,
1994, and the ".EXL" means it is the current log file.
01/01/94
12:15:10
01/01/94
12:15:30
01/01/94
12:30:22
Sample Log Data Printout
Program Startup
Operator Login
Door Opened
After selecting the operator, alarm/control point, and date/time
period, select the Alarm Events to be reported. At least one
event must be selected for the report. Any mix, or all, of the
"Alarm Events" check boxes may be selected.
After the search parameters have been selected, choose
"Display on Screen" or "Send to Printer" for the report by
selecting the respective button at the bottom of the dialog box.
Select "OK" to start the display or printout.
If sent to a printer, the report is printed similar to the on-line
logs. A sample of a log data report printout is shown below.
A message stating "Printing Completed" is displayed after the
selected records have been printed.
If the report is displayed on screen, each event is displayed in a
Log Data box, illustrated below. To display the next or
previous event, use the arrow buttons at the bottom of this box.
When the end, or beginning, of the selected set of events is
reached with the arrow buttons, an message is displayed.
When finished viewing the event records, select "Cancel".
After Printing or viewing the selected records, the Log Reports
menu bar is displayed for additional report requests.
Master Operator
Master Operator
3-3
EXCALIBUR LOG REPORTS
Data Proc. Door
Advertisement
Table of Contents
