Table of Contents
Advertisement
AD5500
Preset
The Preset group at the bottom of the dialog box provides
several special function buttons. The Set, F1, and F2 buttons
are restricted by operator privilege and by the Keyswitch
(Off/Prog/Menu) setting. Refer to the appropriate Switching
System Programming manual for the applicability and use of
these buttons.
Call - Calls up a stored preset scene which has been saved at
the camera Receiver.
Set - Programs a preset scene for a camera Receiver that is
equipped for presets.
F1/F2 - Special programming functions.
User/Site - Special functions for password protection and
Satellite systems.
Cancel
Select "Cancel" at the bottom center of the dialog box to exit
the AD keyboard dialog box and clear it from the screen.
Keyswitch Off/Prog/Menu
Three mutually exclusive selections above the Cancel button
provide a keyboard keyswitch function. Only one of these can
be selected at a time to indicate the keyboard operation.
Off - Select this position to disable all programming
functions from the keyboard.
Prog - Select this position to enable non-menu programming
functions (Preset Set, F1, F2, and Monitor programming).
Menu - Select this position to access on-line programming
menus of the matrix switching system.
Pan/Tilt
The lower right section of the keyboard dialog box provides
pan/tilt control buttons for the called camera.
1. Select the arrow in the direction to move the camera. The
camera pan/tilt motion continues while the mouse pointer
is on an arrow and the left mouse button is held down.
2. Release the left mouse button or move the mouse pointer
off the arrow to stop the pan/tilt action.
2-5
EXCALIBUR
Advertisement
Table of Contents
