Configuring The Video Input; Figure 3-11 Video Input Detail Page; Procedure 3-14 Configuring The Video Input - American Dynamics IP SpeedDome Ultra 8 Configuration And User's Manual

Web Configuration

Configuring the Video Input

The Video Input Detail page allows configuration of the video format, the camera control protocol
and the camera address.
When using 4 CIF the video is automatically deinterlaced to give a better motion quality.

Procedure 3-14 Configuring the Video Input

1 Ensure that the browser is displaying the Configuration page (if not refer to Procedure 3-11).
2 From within the Video Inputs section select the Edit button.
The Video Input 1 Detail page is displayed, as shown in Figure 3-11.
3 Enter the required Name for the Video Input.
4 Select the required Video Format from the drop down menu. The options are Auto, NTSC and
PAL. The default setting is Auto, which will automatically detect the incoming video stream
format.
5 If using 4 CIF the video is automatically deinterlaced to give better quality on motion. To disable
deinterlacing select Disable from the Deinterlace (4 CIF) drop down menu.
6 Select the required PTZ Protocol from the drop down menu. The options are SensorNet or
none. The default setting is SensorNet.
7 Ensure the camera address matches the address on the SDU8.
Note
It is recommended that all camera addresses be left at the default of 1.
8 Select Done to return to the Main Configuration page.
9 Select Save Config to ensure all changes have been saved. Refer to Procedure 3-18 for more
information on saving configuration changes.
3-16

Figure 3-11 Video Input Detail page

Configuration and User Guide