Xerox EX 570 Configuration And Setup page 40

B R
ACK UP AND
T EX/ P
O BACK UP THE I RINT
1 Select "Back up hard disk drive(s)."
2 Configure the backup image settings.
• Select a backup destination from one of the following types of media: USB flash drive,
external hard disk drive, local hard disk drive, or network share.
• Name the backup image folder. The folder name contains the name that you assign and a
time stamp of the backup image. The default name is the server name. The installer
automatically generates the time stamp.
• Enter a description of the backup image.
• Select the appropriate check boxes to include Fiery job files in the backup image or create
bootable media with the backup.
• Save the backup image settings.
3 Start the backup process.
The installer begins creating the backup image.
T EX/ P
O RESTORE THE I RINT
1 Select "Restore from backup or recovery partition."
If you have not previously created a backup image,"Restore from recovery partition" is
displayed.
2 Select the source of the backup.
Select one of the following options.
• One of the two most recently-created backup images.
• The recovery partition, which restores the default system settings from a hidden hard disk
drive partition.
• Search for a backup that you have created on the EX/i Print Server.
The installer begins the recovery process.
N : If you must search for backups, use the following steps.
OTE
3 Select a backup image.
The installer lists each backup image in the following categories.
• Location of the backup image: USB flash drive, external hard disk drive, network location,
or local hard disk drive
• Time at which you created the backup image
• Folder location of the backup image
4 Click OK.
The system is restored.
S
ESTORE ETTINGS
S
ERVER
S
ERVER TO AN EARLIER CONFIGURATION
40