Step 2. Connecting The Scanner - Plustek eScan A350 User Manual

Step 2. Connecting the Scanner

Attention
1. Plug the AC adapter into the scanner's power receptor
2. Attach the power cable to the AC adapter.
3. Plug the other end of the AC adapter into a standard AC power outlet.
4. (Optional) Plug the end of the Ethernet cable
the scanner.
5. (Optional) Plug the other end of the Ethernet cable
4
Ethernet hub
6. Switch on the scanner power from the rear of the scanner.
2
Can also connect without the Ethernet, by going wireless.
3
Can also connect without the Ethernet, by going wireless.
4
Accessories [e.g. hub / router / RJ45 cables] are not included.
Please make sure the scanner is turned OFF
before you plug or unplug the scanner power
adapter.
.
2
to the Ethernet port at the rear of
3
to an available port on the
9
.