System Settings; Wifi And Ethernet - Plustek eScan A350 User Manual

System settings allows you to configure network scanner's Internet connection
(WiFi/Ethernet), adjust, duplicate, import/export device settings, as well as enable
administrator management rights. Alteration should be kept protected (for more info refer
to Administrator Management
W F E
I I AND THERNET
Configuration to the network setting is located under 'System Setting'

on 'More Settings'
connections. (Note: To ensure network stability during file transfer, it is strongly advised
to use Ethernet connection as the main source of Internet connectivity).
Slide 'System Settings' menu for more setting options.
Configure advance system related settings, such as, the Networks setting, enabling
eScan as an Access Point (AP), set a security code for the eScan, the brightness of the
display and much more.

Setting eScan as an Access Point
You may set eScan as an Access Point (AP), so that your mobile devices can
connect to a wired network via eScan.
Tap on Tethering & portable hotspot and Portable Wi-Fi hotspot to activate
eScan as a portable hotspot. Modify the Network SSID and the Security option if
necessary. Enter the Password, the password should contain at least 8 digits. You may
tick the checkbox of Show password to show the hidden password. Tap on Save to
save the settings and tap on Exit on the left column to exit this dialog.
S
YSTEM SETTINGS
section).
to enable/disable and make adjustments to WiFi and Ethernet
25

interface. Tap