Loosening Documents - Plustek eScan A350 User Manual

However, don't use the ADF to scan documents if they meet any of the following
conditions:

Paper lighter than 40 g/m

Paper with clips or staples attached

Paper with inconsistent thickness, e.g., envelops

Paper with wrinkles, curls, folds, or tears

Paper with an odd (non-rectangular) shape

Tracing paper

Carbon paper, pressure sensitive paper, carbonless paper

Items other than paper, e.g., cloth, metal foil.
Attention

Loosening Documents

Before loading documents into the ADF, loosen them as follows:
1. Fan the documents so that no two pages are sticking together. Make sure to
remove static electricity from paper.
2. Hold the documents upside down with both hands, and then gently push them
onto a flat surface to align the edges of all documents.
2
(12 lb.) or heavier than 157 g/m

DO NOT use the ADF to scan photographic
sheets or particularly valuable document
originals; wrinkles or other damages can
happen in case of paper feeding errors.

DO NOT place paper with wet ink or
correction fluid into the ADF. Wait few minutes
for it to get dry.
35
2
(40 lb.)