Breville JUICE FOUNTAINTM PLUS JE98XL Instruction Booklet page 17

OPERATING YOUR JUICE FOUNTAIN™ PLUS
NOTE:
The pulp container can be emptied
during juicing by turning the Juice
Fountain 'Off' and then carefully
removing the pulp container.
(Replace empty pulp container
before continuing to juice). Do not
allow the pulp container to overfill as
this may prevent correct operation
or damage the unit.
NOTE:
To minimize washing up place a
plastic freezer bag into the pulp
container to collect the pulp.
JE98XL_IB_Issue1,09.indd 17
NOTE:
Self-Reset Overheating Protection
The Juice Fountain is fitted with a
self-resetting safety device which
safeguards against overheating on
the motor with excessive loads.
If overheating occurs, the juicer
will automatically activate the
overheating protection device and
the motor will switch itself off. If this
occurs, the Overload Protection LED
will flash red. When the overheating
protection is activated, allow the unit
to cool for at least 15 minutes prior to
continuing juicing. LED will continue
to flash until the motor has reached
below the temperature threshold.
The Juice Fountain will be more
prone to overheating immediately
after the overheating protection
device has been activated, light
fig. 2
loads are recommended.
NEVER USE FINGERS TO
!
PUSH FOOD DOWN THE FEED
CHUTE OR TO CLEAR THE
FEED CHUTE. ALWAYS USE THE
FOOD PUSHER PROVIDED.
17
16/12/09 11:26 AM