Breville THE BARISTA EXPRESS BES860XL Getting To Know Manual page 10

FEATURES OF YOUR BREVILLE BARISTA EXPRESS (continued)
A MINUTE TO LEARN
Dual Wall Filters for Beginners
Eliminates the guesswork for fast and easy to
make espresso.
The Barista Express is supplied with two Dual
Wall Filters - 1 x single shot and 1 x double shot.
These filters are designed to intentionally slow
the water flow rate during brewing, resulting
in an espresso that has been extracted at the
correct pressure, leading to a rich, golden
crema. These filters are suited to both pre-
ground vacuum packed espresso as well as
beans ground fresh in the integrated grinder.
When using these filters, always remember to
set the GRIND SIZE and GRIND AMOUNT dials
to DUAL WALL.
The Dual Wall Filters have 'DUAL WALL'
stamped on the underside of the filter.
10
PERFECTING YOUR SKILLS
Single Wall Filters for Aspiring Baristas
Experiment with grind size, grind amount and
tamp
The Barista Express is supplied with two Single
Wall Filters - 1 x single shot and 1 x double shot.
These filters provide no additional slowing of
the water flow rate, hence experimentation with
the grind size, grind amount and tamp force is
required to achieve favorable results. These
filters are suited to both pre-ground vacuum
packed espresso as well as beans ground fresh
in the integrated grinder.
Refer to 'PERFECTING YOUR SKILLS' on page
35 for details on where to set the GRIND SIZE
and GRIND AMOUNT dials.
The Single Wall Filters have no markings on the
underside of the filter.
ENERGY SAVING FEATURES
The Barista Express will enter the 'Power Save
Mode' if not used for 30 minutes, and will
automatically switch off if not used for a further
two hours. The 'Power Save Mode' uses 50%
less power than when the machine is in 'Stand
By' Mode.
During 'Power Save Mode' only the POWER
button surround will flash slowly. All other button
light surrounds will not be illuminated.
To re-activate the machine during 'Power Save
Mode' simply press any button except POWER.
The POWER button surround will then illuminate
and flash while the machine quickly reheats
to operational temperature. When the correct
temperature has been reached, all the button
surrounds on the control panel will illuminate.
To switch off the espresso machine whilst it is in
'Power Save Mode', simply press the POWER
button once.