Monitoring Aux 1 In The Phones Jack - Alesis Studio 12R Reference Manual

Monitoring AUX 1 in the PHONES jack

If you are using AUX 1 as a monitor feed, you may want to check
that mix using the headphones. If you've connected the PA or
recorder to the MAIN OUTPUTS, and are not using the TAPE IN
jacks, use Y-cords to connect the AUX 1 SEND to the TAPE IN
jack(s) at the same time it feeds the monitor amplifier. Use the
front panel [PHONES/MONITOR] switch to select between the
main and aux 1 feeds.
Studio 12R eference Manual
Applications
42