Operating Instructions; Before Turning The Mixer On, "Zero Out' The Controls - Alesis Studio 12R Reference Manual

Before turning the mixer on, "zero out'
the controls
To avoid surprises while you're setting up a new system, set all controls to their "zeroed
out" positions as follows before proceeding:
1. Make all connections to the Studio 12R, as described in the
previous chapter.
2. Bring all channel faders and the [MASTER] fader down to
minimum.
3. Set all [TRIM] controls to minimum (full counterclockwise).
4. Set all [AUX 1], [AUX 2], STEREO AUX RETURN,
[PHONES/MONITOR] controls to minimum (full
counterclockwise).
5. Set all [HIGH] and [LOW] EQ, [PAN], and [BAL] controls to "12
o'clock".
Studio 12R Reference Manual
O
PERATING
I
NSTRUCTIONS

Operating Instructions

27