Controls - Fujitsu BS2000 SE Series Operating Manual

Server Unit /390

5.1.1 Controls

ID
Identification (ID) button
Lights up (blue) on the front and on the rear of the HNC when the ID button is pressed. The two ID
indicators are synchronized.
On/Off button
When the HNC is switched off, it is switched on again by pressing the On/Off button once.
When the HNC in is in operation, it is switched off by pressing the On/Off button once.
!
CAUTION!
Possible loss of data!
i The On/Off switch does not disconnect the server from the voltage grid. To disconnect from
the mains completely, remove the power plugs.
Reset button
RST or
RESET Pressing the Reset button reboots the HNC.
!
CAUTION!
Possible loss of data!
NMI NMI button
!
CAUTION!
Do not press! Possible loss of data! The NMI button may only be used by Customer Support.
77