Selecting Iorsf - Fujitsu BS2000 SE Series Operating Manual

Server Unit /390

4.5.1 Selecting IORSF

The steps described below are required to load a specific IORSF the next time IMPL takes place or the next time
the system is switched on.
IORSF with Level 2 is selected in the example below.
Requirement
You are logged in to the SE Manager and have opened the SVP console.
i
An operator account has access to the SVP console when the individual right permits SVP access.
The MODE SELECTION FRAME is displayed on the screen:
FUNCTION=>
- EXECUTION -
*1 CPU STOP
*2 INTERRUPT
*3 TOD ENABLE
*4 SYSTEM RESET
*5 SYSTEM RESET CLEAR
*6 STORE STATUS
*7 RESTART
CL-0
RA
Figure 25: MODE SELECTION FRAME screen
Invoke the AUXILIARY FRAME: MENU screen
> Enter in the FUNCTION=> field and then press the ENTER key,
AU
or
----- MODE SELECTION FRAME -----
- SELECTION -
*LD PROGRAM LOAD
*ST STATUS DISPLAY
*MA MANUAL OPERATION
*AD ALTER/DISPLAY
*ME MESSAGE
*CH CH/SUBCH STATUS
*AU AUXILIARY
*MF MSF
*PA PERFORMANCE ANALYZER
CPU-0 CHP-0
E90L01G
CPU SELECT=>
- 0 1 2 3 4
-
STOP/START MODE=>
*1 ALL CPU
>2 TARGET CPU
RUN
[]-[]00
-
-
58