Setting Up Program Load Frame Preset2 - Fujitsu BS2000 SE Series Operating Manual

Server Unit /390

4.5.4 Setting up PROGRAM LOAD FRAME PRESET2

In the PROGRAM LOAD FRAME PRESET2 you specify which operating mode is to be set after the server is
switched on.
The following are specified in the example below:
VM2000 operating mode
Automatic startup of the operating system
Requirement
You are in the AUXILIARY FRAME: LOAD PRESET1.
Invoke the AUXILIARY FRAME: LOAD PRESET2 screen
> Click on PF9.
The AUXILIARY FRAME: LOAD PRESET2 screen is displayed:
----- AUXILIARY FRAME: LOAD PRESET2 -----
-VM MODE-
==> 2
>1 NATIVE
*2 AVM/EX
-START IPL NO-
==> 1
>1 FIX(1)
*2 CURRENT
CL-0
RA
Figure 30: AUXILIARY FRAME: LOAD PRESET2 screen
VM MODE ==>
START IPL NO ==>
Store parameters
CPU-0 CHP-0
Enter for VM2000 operation
2
Always enter 1 for automatic startup
E90L01G
*PF12 CATALOG
*PF9 GO TO LOAD PRESET-1
RUN
[]-[]00
65