Executing Ipl In Program Load Frame: Detail-1 - Fujitsu BS2000 SE Series Operating Manual

Server Unit /390

4.5.5 Executing IPL in PROGRAM LOAD FRAME: DETAIL-1

The IPL can be executed manually according to the setting using PROGRAM LOAD FRAME DETAIL-1.
The following are specified in the example below:
loading VM2000
dialog startup
IPL device is specified manually by the entry of the unit address
(here: loading the VM2000 from a device with the unit address A108)
Requirement
You are in the AUXILIARY FRAME: LOAD PRESET2 screen.
Invoke the PROGRAM LOAD FRAME: DETAIL-1 screen
> Click on ModSel to return to the MODE SELECTION FRAME.
> Enter the frame code
Or enter the
FR LD
i
After entering
setting in the AUXILIARY FRAME: LOAD PRESET1 screen (see
FRAME PRESET1"
PROGRAM LOAD FRAME: DETAIL-1 screen
PROGRAM LOAD FRAME: BASIC screen
In the example the PROGRAM LOAD FRAME: DETAIL-1 is displayed:
and press the ENTER key.
LD
command in line 24 and press the ENTER key.
or in the MODE SELECTION FRAME, depending on the INITIAL FRAME
LD FR LD
) one of the following screens is displayed:
"Setting up PROGRAM LOAD
67